AutoRAE Lite User’s Guide
15
9 Using AutoRAE Lite With The AutoRAE Lite Utility
Program
When connected to a computer with a USB cable, the AutoRAE Lite’s parameters can be viewed. In
Administrator Mode, parameters can be changed. These include synchronizing the AutoRAE Lite’s
time to match the computer’s clock.
In addition, the AutoRAE Lite Utility Program allows you to view the parameters set for a ToxiRAE 3
when it is placed in the AutoRAE Lite’s dock. In Administrator Mode, it is possible to store and load
configuration files. This allows you to save one set of parameters and load them into as many
ToxiRAE 3 monitors as you want.
9.1 Computer Setup And AutoRAE Lite Utility Program
Installation
1.
Install the USB driver, following the instructions on the RAE Systems website or on the utilities
disc that accompanies your AutoRAE Lite.
2.
Install the AutoRAE Lite Utility Program on your computer. Follow the instructions after downloading
the program from the RAE Systems website or after you insert the disc into your computer.
Once installation is complete, there should be an icon for it on your desktop, indicating that the
program is ready for use:
3.
Connect the AutoRAE Lite to a computer using a USB cable.
4.
Configure your computer’s port. Follow this path: Start >> Control Panel >> System>>Device
Manager. You should see a list of devices in and attached to your computer.
5.
Scroll down the list until you see “Ports.”
