Radyne DMDVB20 LBST, Installation And Operation Manual

Page: 59 / 113

DMDVB20 LBST Satellite Modem User Interfaces
TM138 – Rev. 1.0 4-23
REMOTE PORT (menu)
ADDRESS {32 - 255}
Allows the user to enter the Remote Port Multidrop
Address.
BAUD RATE {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600}
Allows the user to enter the Remote Port Baud Rate.
INTERFACE {RS-232, RS-485}
Allows the user to enter the Remote Port interface type.
TCP/IP Menu (THIS FEATURE IS NOT SUPPORTED)
BOOT MODE {DEFAULT, NON-VOL, BOOTP, IP TEST}
DEFAULT: During initialization (boot up), the modem will restore the
web setting to the standard IP Mask and addresses supplied by the
modem. The modem will be taken off the network and will not be
accessible. The Default settings are:
IP Address Mask: 255.000.000.000 (FF.00.00.00 hex)
Modem IP Address: 010.000.000.001 (C0.A8.00.EE hex)
Server IP Address: 010.001.001.001 (0A.01.01.01 hex)
Router IP Address: 010.000.001.001 (0A.00.01.01 hex)
BOOTP: During initialization (boot up), the modem will get the
names, masks, and IP Addresses of the modem, router,
and server.
NON-VOL: Stores and uses IP Mask and addresses as provided by
the user.
IP TEST: Stores and uses IP Mask and addresses to fixed settings as
listed below.
Bootp
Server Tag: 206
IP Address Mask: 255.255.255.000 (FF.FF.FF.00 hex)
Modem IP Address: 192.168.0.238 (C0.A8.00.EE)
Server IP Address: 192.168.000.101 (C0.A8.00.65)
Router IP Address: 192.168.000.102 (C0.A8.00.66)
BOOTp SERVER {128 – 257, default is 206}
Only used if Bootp is selected in Boot Mode. Should be
consistent with the tag expected by the users Bootp
Server.
MODEM
HOST The Host Modem for the network.
IP ADDR MASK {XXX.XXX.XXX.XXX} Hexadecimal Mask
{ddd.ddd.ddd.ddd} Decimal Mask