RADWAG PUE H315, User Manual

Page: 9 / 28

9
4.5. Technical specifications
Housing Stainless steel
Ingres Protection IP 66 / IP 67 / IP 69
Operating temperature -
10°C to +40°C
Display LCD
Power supply
100 ÷ 240VAC 50÷60Hz
Optional supply External 12-24VDC
OIML Class II and III
Max. of verification interval (n) 6000
Maximum signal increase 39mV
Min. voltage per verification interval 0,4uV
Min. impedance of load cell 50

Max. impedance of load cell 1200

Load cell supply 5V
Load cell wiring 4 or 6 wires with shield
Max. number of platforms 1
Multirange Yes
RS232 (1) M12 8P connector
USB M12 4P connector
Optional Equipment:
RS232 (2) M12 8P connector
RS485 M16 cable gland
Ethernet M12 4P connector
4-20mA current loop M16 cable gland
4IN/4OUT M16 cable gland
Battery supply Rechargeable battery 6 x NiMH AA/R6
5. INDICATOR INSTALLATION
5.1. Unpacking and Installation
A. Take the indicator out of the packaging.
B. Connect the indicator and the platform and place the set on a flat and
even surface. Keep it far away from any sources of heat.
C. To level the weighing instrument turn its feet. Keep turning the feet until
the air bubble takes central position: