RADWAG PUE H315, User Manual

Page: 16 / 28

16
0.2.b. Aur
PrF, 0.1d, 0.2d, 0.25d,
0.5d, 0.6d, 0.7d, 0.8d,
0.9d, 1d, 2d, 2.5d, 3d,
4d,5d,6d, 7d, 8d, 9d, 10d Autozero range: PrF - value taken
from program-implemented tables;
0.1d - 10d - value entered directly by
a user.
0.2.c. Aut
PrF, 0, 0.2s, 0.4s, 0.6s,
1s, 2s, 3s, 4s, 5s, 6s, 7s,
8s, 9s, 10s, 15s, 20s, Autozero time: PrF - value taken from
program-implemented tables; 0s - 20s
- value entered directly by a user.
0.2.d. Str
PrF, 0.1d, 0.2d, 0.25d,
0.5d, 0.6d, 0.7d, 0.8d,
0.9d, 1d, 2d, 2.5d, 3d,
4d,5d,6d, 7d, 8d, 9d, 10d
Stability range: PrF - value taken from
program-implemented tables; 0.1d -
10d - value entered directly by a user.
0.2.E. Stt
PrF, 0, 0.2s, 0.4s, 0.6s,
1s, 2s, 3s, 4s, 5s, 6s, 7s,
8s, 9s, 10s, 15s, 20s, Stability time: PrF - value taken from
program-implemented tables; 0s - 20s
- value entered directly by a user.
0.2.F. rAn YES, no, 50%, dEF
Start mass control: YES
– range: from
-10% to +10% of start mass, no
– off,
50%
– range: from -50% to +50% of
start mass, dEF
– range declared in
0.2.G. parameter.
0.2.G. rnt 10% - 90% Start mass range in [%].
0.2.H. Ldn no, YES Digit marker for non-verified scales.
0.3. CAL - Adjustment
0.3.1. CLE - External adjustment process.
0.3.2. Std -
Determination of start mass for
external adjustment.
0.3.3. CLI - Internal adjustment process.
0.3.4. Stu -
Start mass expressed in converter's
divisions.
0.3.5. AdF - Adjustment factor.
0.3.6. CAC
0.1, 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12. Setting time interval, in [h] , after which
internal adjustment is triggered.
0.3.7. CAt
0.1, 0.2, 0.3, 0.4, 0.5, 0.6,
0.8, 1, 1.5, 2, 2.5, 3, 4, 5,
6, 8, 10 Setting temperature difference, in
[

C] , for which internal adjustment is
triggered.
0.3.8. CAS -
Internal adjustment weight weighing
procedure.
0.3.9. CAu -
Internal weight relocation, up-down
direction.
0.3.A tP -
Display of current temperature, in
[

C] .
0.4. LinE - Linearity
0.4.1. dSG - Entering linearity correction points.
0.4.2. dEL - Deleting linearity.