RADWAG PUE 5.15, Service Manual

Page: 5 / 65

- 5 -
1. INTENDED USE
PUE 5.15, PUE 5.19 terminals are designed for scales that work with strain
gauge load cells. The terminals’ housing is made of stainless steel. PUE
5.15, PUE 5.19 are intended to be used in industry.
A big colourful screen of the terminal with a touch panel makes the software
operation much more comfortable since there is no need to use a keyboard.
PUE 5 terminal is a genuine device that consists of two units: the computer
and the weighing module, placed in one housing. Both of these units are
connected via an internal interface. The possibility of using common
operating systems allows external companies to create its software or to use
the existing one.
Such common devices as PC computers can be used with the terminal,
which is a great advantage while creating a network. Individual workstation
with the PC device is as well possible.
The terminal can work with 4 weighing platforms (option).
2. PRECAUTIONS MEASURES
A. Before the first use read the Service Manual carefully and follow the
instructions. Use the device as intended.
B. The weighed products should be placed in the central part of a scales
pan.
C. Do not use any means causing corrosion for cleaning.
D. The gross mass of weighed products must be lower than the scales
maximum load.
E. Great loads shouldn’t be left on the scales pan too long.
F. In case of a failure the device power supply should be instantly switched
off.
G. If the device is to be put out of operation it must be utilized in
accordance with the actual law regulations.