- 6 -
3. WARRANTY CONDITIONS
A. RADWAG company will repair or replace the elements that turn out to
be faulty in terms of production or construction.
B. Agreeing on the ways of any defects elimination in case of their unclear
origin can be done only in presence of the producer and the user
representatives.
C. RADWAG is not responsible for any loss or damages in case of
unauthorized or incorrect execution of production or service processes.
D. Warranty does not cover:
•
Mechanical defects caused by product exploitation other than
intended, defects of thermal and chemical origin, defects caused by
lightning, overvoltage in the power network or other random event,
•
maintenance (the cleaning process).
E. Loss of warranty takes place if:
•
A repair is carried out outside RADWAG sales office or authorized
service point,
•
Service claims intrusion into mechanical or electronic construction
by unauthorized people,
•
The device does not bear company’s protective stickers.
F. Detailed warranty conditions are listed on a service card.
G. Authorized Service phone number:
(0-48) 384 88 00 extension numbers: 106 and 107.
4. UNPACKING AND INSTALLATION
A. Take terminal out of its factory packaging.
B. Connect the terminal to a weighing platform and place it on a smooth,
even, thick surface away from any heat sources,
C. It is necessary to level scales. Turn right and left the levelling feet. The
correct levelling is obtained when an air bubble is placed in a centre of
the small ring.
Summary of Contents for PUE 5.15
