- 78 -
15.5.
Minimal mass required for activation of automatic
printout
Balance software is equipped with a function for setting
automatic operation
.
While in automatic operation, data will not be transmitted through RS 232 to a
connected computer or printer until mass reading is above
Lo
value.
•
Press
key to select a digit which should be changed;
•
Press
key to change value of selected digit.
Go back to weighing mode with procedure of saving changes
(see point - 8. 2. – return to weighing).
Summary of Contents for APP 10/2C
Page 2: ...2 NOVEMBER 2012...
Page 22: ...22...
Page 70: ...70...
Page 71: ...71 Return to weighing mode...
