RADWAG APP 10/2C User Manual Download Page 7

Page: 7 / 87

- 7 -

2.4.

Monitoring metrological parameters of the instrument

Metrological characteristics of the balance requires periodical inspection

carried out by its operator. Inspection frequency is conditioned by ambient

conditions in which the balance is used, types of performed processes and

accepted quality management system in an organization.

2.5.

Data included in this user manual

Please read the user manual carefully before assembling and startup, even if

the user is experienced with this type of weighing instruments.

2.6.

Staff training

This balance should only be operated and maintained by personnel who is

trained and experienced in using this type of balances.

TRANSPORT I STORAGE

3.1.

Delivery check

Please check the packaging immediately upon delivery and the device during

unpacking for any visible signs of external damage.

3.2.

Packaging

Please retain all parts of the original packaging should the balance be

transported in the future. Only the original packaging should be used for

dispatching the balance. Before packing, disconnect all attached cables and

remove any loose/movable parts (weighing pan, anti-draft shields, etc.). Please

place balance and its components in their original packaging, and protect them

against damage during transport.

Summary of Contents for APP 10/2C
























































































Search results

Summary of Contents for APP 10/2C

Reviews:

Related manuals for APP 10/2C

Brands by name

Popular brands

RADWAG APP 10/2C, User Manual

Search results

Summary of Contents for APP 10/2C

Reviews:

Related manuals for APP 10/2C

Brands by name

Popular brands