Managing Calls and Videoconferences | 34
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Positioning the Local and Remote Cameras
You can control the remote camera when the connection with the remote endpoint is established
and the remote camera is configured to be remotely managed.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the Cameras tab.
Figure 7-1
Positioning cameras
Step 3
Choose the camera you want to position by selecting Local or Remote.
Step 4
Position the camera by selecting arrow buttons under Move.
Step 5
If necessary, adjust the zoom by selecting the Plus and Minus buttons under Zoom.
Step 6
Choose the other camera and position it, if necessary.
Recalling a Camera Position
This feature helps you move the camera to your preferred position and facilitates setting up the
videoconference. Just recall the preferred camera position you stored previously in the system,
and the camera moves to the memorized position.
For information about storing a camera position, see
“Storing a Camera Position” on page 25
Procedure
Step 1
Press preset
on the XT Remote Control Unit.
Step 2
Enter the number corresponding to the required preset position.
