Managing Calls and Videoconferences | 45
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Blocking Incoming Calls
You can block an incoming call using the Do Not Disturb feature if you do not want to answer.
When a remote endpoint calls and you block an incoming call, the XT Series rejects the incoming
call and the call is disconnected. The
icon appears in the system information area of the
monitor display.
To block an incoming call, press and hold the Privacy
key on the XT Remote Control Unit.
When you block an incoming call as described in this section, the system disconnects all incoming
calls until you disable the feature by pressing and holding the Privacy
key again.
You can configure the XT Series to automatically block all incoming calls, if you want this to be
the default behavior. For operational information, see
“Configuring the SCOPIA XT Series to Block
Incoming Calls by Default” on page 21
.
Managing the Phonebook
This section details how to manage the contact information stored in the SCOPIA XT Series:
•
Adding a Contact to the Phonebook......................................................... page 45
•
Modifying a Contact in the Phonebook ..................................................... page 47
•
Searching for a Contact in the Phonebook ................................................. page 47
•
Deleting a Contact from the Phonebook ................................................... page 48
Adding a Contact to the Phonebook
You can add a new contact to the phonebook at any time.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
Select the Make your call tab.
Step 3
Select Contacts on the left.
Figure 7-11
The Contacts page
