Procedure
Step 1
On the front panel, verify that the power LED is lit green.
Figure 5-16
Locating the front panel LEDs
Step 2
Verify that the status LED is lit green (selected models only).
Step 3
Check the network connection by verifying that the Ethernet activity LED is lit green.
Step 4
Verify the device is ready for use by creating a conference:
a.
From an endpoint dial the MCU IP address.
The MCU auto attendant service plays the video and audio prompts.
b.
Press 0 to create a new conference.
c.
At the prompt, enter the meeting ID followed by #.
The MCU creates the conference opens the Conference window.
d.
Exit the conference by disconnecting the call.
Step 5
Access the MCU Administrator web interface to verify all status icons are green on the home
page.
RADVISION | Installation Guide for Scopia Elite 6000 Series MCU Version 8.0
Performing the MCU Initial Configuration | 45
