Figure 5-14
SIP Port Configuration
Step 3
Do one of the following:
•
If your SIP server or Registrar is not configured with TLS, enter the port value in the Local
signaling port field.
•
If your SIP server or Registrar is configured with TLS, enter the port value in the Local
TLS signaling port field.
Note
If your SIP server or Registrar is configured with TLS, you can also configure the port
value for TCP/UDP traffic by modifying the Local signaling port field.
Step 4
Select Apply.
Configuring Security Access Levels for the Scopia Elite MCU
The Scopia Elite MCU offers configurable security access levels that enable and disable SSH,
FTP, SNMP and ICMP (ping) protocols.
By default, the security access level is set to High. It is recommended to set your security
access level to Maximum (which disables these protocols), except for the following situations:
•
If you are performing either debugging or troubleshooting operations, SSH should be
enabled.
•
If you are customizing your language settings, FTP should be enabled.
RADVISION | Installation Guide for Scopia Elite 6000 Series MCU Version 8.0
Performing the MCU Initial Configuration | 43
