RadTech 21700001, Owner'S Manual

Page: 35 / 52

STORAGE
[33]
S
TORAGE
Before storing the snowblower, certain
precautions should be taken to protect it from
deterioration.
1. Clean the attaching points and snowblower
thoroughly.
2. Make all the necessary repairs.
3. Replace all safety signs that are damaged, lost,
or otherwise become illegible. If a part to be
replaced has a label on it, obtain a new safety
label from your dealer and install it in the same
place as on the removed part.
4. Repaint all parts from which paint has worn or
peeled.
5. Lubricate the snowblower as instructed under
"Lubrication" section.
6. When the snowblower is dry, oil all moving
parts. Apply oil liberally to all surfaces to
protect against rust.
7. Install the chain of the driveline shaft to support
it .
8. Store in a dry place.