RadTech 21700001, Owner'S Manual

Page: 28 / 52

MAINTENANCE
[26]
To avoid serious personal injury or death:
Provide adequate blocking before working
under the snowblower when in raised position
Shearbolts
At regular intervals, check the tightening of the shearbolts shown in the figure below to ensure proper
operation of the snowblower. To access the shearbolts (items 1 and 2), lift the guards (items 3 and 4).
If the bolts need to be replaced, use the following parts only:
MAINTENANCE SCHEDULE
D
ESCRIPTION
I
NTERVAL
R
EQUIRED
M
AINTENANCE
Hardware
After the first 8 hours of operation Tighten all nuts and bolts according to
the Torque
Specification Table .
40 hours of operation
Connection points
Hydraulic/Electric
Before each equipment connection
Visual inspection of the connectors hydraulic/electric.
Clean if necessary.
Shearbolts As needed See Table and the figure below
Lubrication See Table next page See Table next page
B84C-L
Driveline (item
1
)
657199
Drive shaft (item
2
)
669596