manualshive.com logo in svg

Rado Captain Cook Automatic Bronze, Product Information

Share
Download
Rado Captain Cook Automatic Bronze Product Information Download Page 45

55

3. To set the time

Pull the crown out to position 3 and turn  
it forwards or backwards to the desired 
time. Accept by pushing the crown back to 
position 1 to coincide with  
a given time signal. 

Chronograph functions

Timing to within 1/4th of a second for  
up to 12 hours.

Make sure the chronograph hands are  
at zero (Pusher B). 
Pusher A: Start – stop, start – stop etc.
Pusher B: Reset (after a stop).

SELF-WINDING CHRONOGRAPH 
WITH DATE 
CALIBERS: 603, 674*

* 

On certain models this movement has no 

display of the date.

THE CROWN HAS 3 POSITIONS

1. Normal position

When pressed in against the case  
(position 1), the crown ensures that the 
watch is water-resistant (if not damaged).

2. To set the date

Pull the crown out to position 2, turn  
it forwards to set the desired date.   
Push the crown back to position 1. 

NOTE: Date setting is not recommended  
between 8 pm and 2 am.

Summary of Contents for Captain Cook Automatic Bronze
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands