manualshive.com logo in svg

Rado Captain Cook Automatic Bronze, Product Information

Share
Download
Rado Captain Cook Automatic Bronze Product Information Download Page 41

51

3. To set the time

Pull the crown out to position 3 and turn it 
forwards or backwards to the desired time. 
Accept by pushing the crown back to posi-
tion 1 to coincide with a given time signal. 

SELF-WINDING CHRONOGRAPH 
WITH DATE 
CALIBERS: 650, 652, 653

THE CROWN HAS 3 POSITIONS

1. Normal position

When pressed in against the case  
(position 1), the crown ensures that the 
watch is water-resistant (if not damaged).

2. To set the date 

Pull the crown out to position 2 and rotate  
it backwards (Caliber 650 forwards only) to 
the desired date, then push the crown back 
to position 1.

NOTE: Date setting is not recommended 
 between 8 pm and 2 am.

3. To set the time

Pull the crown out to position 3. The small 
seconds hand will stop. Set the correct time 
by turning the crown forwards or backwards 
(Caliber 650 forwards only). Accept by 
pushing the crown back to position 1 to 
coincide with a given time signal.

Chronograph functions

Timing to within 1/4th of a second for  
up to 12 hours.

Summary of Contents for Captain Cook Automatic Bronze
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands