manualshive.com logo in svg

Rado Captain Cook Automatic Bronze, Product Information

Share
Download
Rado Captain Cook Automatic Bronze Product Information Download Page 13

23

2. To set the date and day

Pull the crown out to position 2, turn  
it forwards to set the desired date. Turn  
it backwards to set the desired  
day of the week. Push the crown back  
to  position 1.

3. To set the time

Pull the crown out to position 3 and turn  
it forwards or backwards to set the desired 
time. Accept by pushing the crown back to 
position 1 to coincide with a given time sig-
nal.

QUARTZ WATCHES 
WITHOUT DATE DISPLAY 
CALIBERS: 080, 140, 150, 153, 318, 322, 
420, 963

THE CROWN HAS 2 POSITIONS

1. Normal position

When pressed in against the case  
(position 1), the crown ensures that the 
watch is water-resistant (if not damaged).

2. To set the time

Pull the crown out to position 2 and turn  
it forwards or backwards to set the desired 
time. If the watch is equipped with  
a  seconds hand, accept by pushing the 
crown back to position 1  
to  coincide with a given time signal. 

Summary of Contents for Captain Cook Automatic Bronze
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands