manualshive.com logo in svg

Rado Captain Cook Automatic Bronze, Product Information

Share
Download
Rado Captain Cook Automatic Bronze Product Information Download Page 40

50

SELF-WINDING WATCHES 
WITH DAY/DATE DISPLAY 
CALIBERS: 636, 648, 764***, 770***

*** This movement has a power reserve up 
to 80 hours.

THE CROWN HAS 3 POSITIONS

1. Normal position

When pressed in against the case  
(position 1), the crown ensures that the 
watch is  water-resistant (if not damaged).

2. To set the date

Pull the crown out to position 2, turn  
it forwards to set the desired date. Turn  
it backwards to set the desired  
day of the week. Push the crown back  
to  position 1. 

NOTE: Date setting is not recommended 
 between 8 pm and 2 am.

POWER RESERVE INDICATOR

Caliber 772*** features a power reserve 
indicator. When the watch is fully wound (by 
wearing or manual winding) it provides a 
power reserve of up to 80 hours. If the 
watch is not worn for a while, or worn only 
infrequently, the power reserve indicator 
moves counter-clockwise. When the 
indicator reaches the lower red area of the 
display, the watch should be worn or wound 
manually (place the crown in position 1 and 
turn it forwards several times) to ensure it 
does not stop. During winding, the power 
reserve indicator moves clockwise and stops 
once the watch has been fully wound.

Summary of Contents for Captain Cook Automatic Bronze
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands