1239-306
20V MAX IMPACT DRIVER
6
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical
help.
Liquid ejected from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
SPECIFIC SAFETY RULES
WARNING:
Know your cordless impact driver. Do not plug in the charger or install
the battery in the tool until you have read and understand this Owner's Manual. Learn
the tool’s application and limitations as well as the specific potential hazards related to
this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.
Always wear eye protection. Any power tool can throw foreign objects
into your eyes and cause permanent eye damage. ALWAYS wear safety
goggles (not glasses) that comply with ANSI safety standard Z87.1.
Everyday glasses have only impact resistant lenses.
They ARE NOT safety glasses.
WARNING:
Glasses or goggles not in compliance with ANSI Z87.1
could cause serious injury when they break.
Always wear hearing protection and a dust mask. Use only in a well-ventilated area.
Using personal safety devices and working in a safe environment reduces the
risk of injury.
WARNING:
Always use a safety shield, hearing protection and dust mask when
drilling concrete.
WARNING:
To avoid fire or toxic reaction, never use gasoline , naphtha, acetone,
lacquer thinner or similar highly volatile solvents to clean the tool.
WARNING:
Use only accessories that are recommended for this impact driver.
Follow the instructions that accompany the accessories. The use of improper
accessories may result in injury to the operator or damage to the tool.
WARNING:
If any part is missing or damaged, do not plug the tool into the power
source or install any accessory until the missing or damaged part is replaced.
Use impact sockets and accessories that are designed for use with an impact driver.
Do not use chrome plated sockets and accessories. Chrome plated sockets and
accessories are designed for hand use only and MUST NOT be used with an impact
driver. They may shatter and possibly cause serious injury.
Before each use, check the impact sockets and accessories for excessive wear or
cracks. Worn or damaged sockets or accessories may shatter and possibly cause
serious injury. Worn accessories may allow the socket to come off during operation
of the impact driver.
After installing any accessory in the hex drive, pull outward on the accessory to
ensure it is properly installed and cannot be pulled out of the hex drive.
Never use the impact driver as a torque wrench. Always use a torque wrench to
