17
7. Push the forward/reverse button to the RIGHT for removing screws.
8. Insert the bit fully into the screw head.
9. Hold the impact driver and bit firmly against the screw head and squeeze the trigger
switch.
NOTE:
The impact action will allow you to remove tight screws.
This impact driver may be used with nut drivers and impact sockets. Although these
accessories are NOT included with this tool, they may be purchased separately.
WARNING:
Nut drivers, socket adaptor and sockets MUST be impact rated and
include the ANSI locking groove.
INSTALLING NUT DRIVERS FOR 3/16" TO 3/8" NUTS
1. Select the correct nut driver size.
2. Insert the hex end (1) into the hex drive (2) (Fig. 11).
NOTE:
See Fig. 3 for complete procedure.
Fig. 11
2
1
INSTALLING IMPACT SOCKETS FOR 7/16" TO 3/4" NUTS
1. Insert the hex end of the socket adapter (1) into the hex drive (2) (Fig. 12).
2. Select the correct socket size.
3. Push the square end of the socket (3) onto the matching square end of the adaptor (4).
NOTE:
Make sure the socket is fully installed onto the square portion of the adapter.
1
2
3
4
Fig. 12
