RadiSys EPS-6315, Hardware Reference Manual, Page: 55 / 123

Chapter 4: BIOS configuration
45
I/O Device Configuration sub-menu
Use the options in this sub-menu to configure the onboard serial disk controller.
Figure 4-10. I/O Device Configuration sub-menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
Serial port A: [Auto]
I/O Device Configuration
Advanced
Field Description
Serial Port A Configures the selected serial port. You can select one
of these:
•
Auto (default) : Either the BIOS or OS configures the
serial port.
• Disabled : The serial port (COM A) is not configured. If
you select this option, you must also set the Com Port
Address option on the
Console Redirection sub-menu to
“On-board COM A”.
• Enabled : The user configures the serial port. If you select
this option, you must also set the Com Port Address
option on the
Console Redirection sub-menu to
“Disabled”.