RadiSys EPS-6315, Hardware Reference Manual, Page: 53 / 123

Chapter 4: BIOS configuration
43
Console Redirection sub-menu
Options in this menu configure console redirection.
Figure 4-9. Console Redirection sub-menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
<Tab>, <Shift-Tab>, or <Enter>
selects field.
Item Specific Help
Com Port Address [On-board COM
A]
Baud Rate [115.2K]
Console Type [VT100]
Flow Control [None]
Console connection: [Direct]
Continue C.R. after POST:[On]
Console Redirection
Advanced
Field Description
Com Port Address Specifies the serial port to use for console redirection. You
can select one of these:
•
On-board COM A (default) : The system uses COM A
for rediretion.
• Disabled : The system does not redirect input.
Baud Rate Specifies the baud rate at which the COM port operates.
You can select one of these:
• 600
• 9600
• 1200 • 19.2K
• 2400 • 38.4K
• 4800 • 115.2K (default)
Console Type Identifies the console type. You can select one of these:
• VT100 (default)
• PC ANSI
Flow Control Specifies flow control. You can select one of these:
• None (default)
• CTS/RTS
• XON/XOFF