RadiSys EPS-6315, Hardware Reference Manual, Page: 44 / 123

EPC
®
-6315 Hardware Reference
34
PrPMC customizations sub-menu
Options in this menu customize PrPMC options.
Figure 4-5. PrPMC customizations sub-menu
Main
F1 Help
↑↓
Select Item –/+ Change Values F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Item Specific Help
Backplane I/O [Disabled]
Backplane Ready [Enabled]
Memory Remap 0 [Use system BIOS Settings]
Memory Remap 1 [Use system BIOS Settings]
Memory Base/Limit 0 [Use system BIOS Settings]
Memory Base/Limit 1[Use system BIOS Settings]
SCSI Controller
[Disabled]
PrPMC Customization
Advanced
Field Description
Backplane I/O Determines how the backplane implements I/O. You can
select one of these:
•
Disabled (default) : The local PCI bus services all
I/O accesses.
• Enabled : I/O addresses pass through to the backplane
PCI bus.
Backplane Ready Determines how resources are assigned during boot. You
can select one of these:
•
Enabled (default) : Selecting this option sets the
Backplane Ready bit after resources are assigned.
• Disabled : Selecting this option prevents the Backplane
Ready bit being set by the System BIOS.
Memory Remap n Maps local DRAM into backplane PCI space. You can select
one of these:
• Use system BIOS settings (default)
• 0
• 256 MB
• 1 MB • 512 MB
• 16 MB