RadioRA Setup Guide Addendum
ROOM Programming
Assigning a GRAFIK Eye Control Unit to ROOM Buttons
All buttons are factory set as ROOM Buttons.
1-3
Section 1 - Start-Up
Step 3
Assign a GRAFIK Eye Control
Unit to button
Notes:
• Multiple Dimmers, Switches or GRAFIK Eye Control
Units can be assigned to a single ROOM button.
• Controls must be assigned to a Master Control
button while its LED is flashing.
If you assign the wrong GRAFIK Eye
Control Unit to a Master Control
button, turn the GRAFIK Eye Control
Unit OFF to unassign it.
MASTER BR
LIVING RM
FOYER
FAMILY
DEN
DINING
READING
MORNING
NIGHT
MOVIE
PATIO
FR. PORCH
GARAGE
BASEMENT
LAUNDRY
ALL ON
ALL OFF
ROOMS
ROOMS
ROOMS
Step 2
Select a ROOM button
Press and release the ROOM button that you
want to program. Its LED will begin to flash
Step 1
Begin assigning GRAFIK Eye
Control Units to ROOM
buttons
What is a ROOM button?
ROOM buttons can be used to turn a light or a group of
lights ON or OFF. Pressing a ROOM button once will
turn ON all controls assigned to that button to their pre-
selected light level. Pressing the same ROOM button
again will turn OFF all controls assigned to that button.
A ROOM LED will be ON if any control assigned to that
button is ON, regardless of its light level.
Simultaneously press and hold the 2nd and
4th buttons in the right most column until the
upper right LED begins to flash (approximately
3 seconds).
ALL ON
ALL OFF
MASTER BR
LIVING RM
FOYER
FAMILY
DEN
DINING
READING
MORNING
NIGHT
MOVIE
PATIO
FR. PORCH
GARAGE
BASEMENT
LAUNDRY
ALL ON
ALL OFF
Table Top Master
Wall Master
OR
Upper right LED flashes.
All GRAFIK Eye Control Units will turn OFF.
LUTRON
Note: GRAFIK Eye Control Units will
automatically turn ON to scene 1 once
assigned.
Assign a GRAFIK Eye Control Unit to the
Master Control ROOM button by turning the
GRAFIK Eye Control Unit ON to any scene.
