©2016 DEKIST Co., Ltd. Rev. 1.6
E.
Input the address of the DNS1 server.
F.
Input the address of the DNS2 server.
G.
Input the subnet mask value.
H.
The VMAC has the same value as the MAC of the Ethernet. This is mainly used as a unique ID
value. Even when you change the VMAC value, the actual MAC value will not change.
I.
Change the port that is used for UDP broadcasting.
J.
Change the access port number on Telnet.
K.
Input the SSID of the WiFi AP.
L.
Input the password for the WiFi AP.
M.
Select the security mode of the WiFi AP.
N.
Search for and select a nearby WiFi AP.
5.2 System configuration
[2.SYSTEM SETUP MENU.]
A.Set Device Name [ DEVICE-001ec01268e4]
B.Set Destination of HTTP[ TAPACULO365 ]
C.Set HTTP Update Interval [ 5 Min.]
G.Set FND Display Mode [ CH1&CH2 ON ]
H.Set Debug Print [ OFF ]
Q.Quit.
A.
Change the name of the device. The default value is "Device-MAC address."
B.
Select the transmission protocol for the data gathered. You can choose TAPACULO365 or CUSTOMER
SERVER. Use the Customer Server setting if the server was developed by the user. An HTTP GET call
is made to the server designated by the user. The detailed configurations will be made in 5. HTTP.
C.
Select the data transmission frequency. It can be configured every minute (minimum).
D.
Choose whether to use the LED display on the front or not to. Both CH1/CH2 can be set ON or OFF.
