background image

©2016 DEKIST Co., Ltd.                                                                                                                                  Rev. 1.6 

4. How to Operate

 

4.1 Data logging by the local PC 

 

RN172  is  a  suitable  product  for  establishing  an  integrated  monitoring  server  through  the  wireless 

internet. It is used to transmit the data gathered by UA10, UA11, etc. The image above is an example of a 
configuration of the monitoring server through the intranet, without being connected to the internet. It 
may automatically be assigned an IP or the user may manually assign a fixed IP to it. The Tapaculo Lite 
software provided as a part of the package is used to detect a device and to make requests for the data 
to the device. The data received from the device is saved in the DB. 

 

4.2 Data logging in a remote location 

 

Via the internet, the product can be used to gather information from other devices located in a remote 
place.  Each  RN172  device  will  do  with  a  private  IP  from  the  internet  router.  No  separate  public  IP  is 
necessary. Tapaculo365.com supports data gathering. It provides free accounts, with which you can use up 
to 20 data channels. The registration of the device is done by inputting the MAC address indicated on the 
side of the RN172 unit. 

Summary of Contents for RN171-W





















Reviews: