©2016 DEKIST Co., Ltd. Rev. 1.6
10. How to Use the Tapaculo365.com Web Service
If the RN171/172 products can be connected to the internet, the field data can be monitored from a
remote place with ease.
10.1 Installation of the device
Connect the RN171/172 devices to the power source and proceed with the establishment of an internet
connection. You may use either a router or a fixed IP. If the LED lamp on the front blinks in red and green
alternately, the internet connection has been established. If only the green light is on and you don't hear
the melody, there is something wrong with the internet connection.
How to check the status during installation
Unregistered device : The LED on the front blinks in red and green alternately
once the power is on.
Registered device: When the power is on, you will hear the melody.
When there is an error with the internet connection: There is no reaction when you connect
the power. Only the green light will remain on.
10.2 Registering a new device
Access
S2.TAPACULO365.COM.
If you are not yet a member, sign up for
membership first.
Once you are logged in, go to Device
Configuration > New Device. A device that
is connected to the internet will
automatically be detected.
Basically, it detects the devices that are using the same IP band. When searching for a device located
at places other than those covered by the same network, search based on the ID of the device (MAC
