9
Note: It is prohibited that all 7 bits are recessive. (Prohibited setting: ID=1111111XXXX)
③
Default Values
(1) Click and all parameters on this page will be restored.
④
Preset ID
(1) The ID that receives the channel data (Refer to Preinstall).
⑤
User Filter ID setting
If you only want to receive the standard frame whose CAN ID is 0x317, the setting method is
as follows:
Filter ID: Set to the binary bit 011 0001 0111, corresponding to 317.
Filter Mask ID: Set to the binary bit 111 1111 1111, corresponding to 1FFFFFFF
If you want to receive standard frames whose CAN ID is 0x310 to 0x317, the setting method
is as follows:
The meaning of each bit in Filter Mask ID:
(1) Bit x is set to 1, and the bit x of the received ID must be consistent with the bit x of the Filter
ID, otherwise it will be ignored.
(2) Bit x is set to 0, regardless of whether the bit x of the received ID matches or not, as long
as all the bits of 1 match, the data will be received and responded. Assuming that the Filter Mask
ID is set to 0, all messages will be received and responded.
(3) CAN Send
①
Running Mode: (Consistent with CAN Acceptance Filter)
②
Preset mode parameters:
(1) With Extended Frame not ticked, the ID range can be set from 0 to 7FF
(2) With Extended Frame ticked, the ID range can be set from 0 to 1FFFFFFF
Note: It is prohibited that all 7 bits are recessive. (Prohibited setting: ID=1111111XXXX)
(3) ID1: ID that sending data of channel 1-4
