Radiolink Electronic Limited
3
/
17
Thanks for purchasing RadioLink mini drone F110S.
To fully enjoy the benefits of this product and ensure safety, please read the introduction
carefully and set up the device as described below:
If any problems found during the operation process, please kindly refer to the manual first.
Then pilots could contact our distributors to find solution or follow our Facebook homepage
https://www.facebook.com/Radiolink-1455452961436694/
to search related key words. Also
pilots can send questions to
or
and we will answer your question at the earliest.
Due to unforeseen changes in production procedures, the information contained in this
manual is subject to change without notice.
For more information please check our website
and follow our
Facebook and youtube homepage.
SAFETY PRECAUTIONS
Never operate models during adverse weather conditions. Poor visibility can cause
disorientation and loss of control of pilots model.
Never use this product in a crowd or illegal areas.
Make sure no props installed when setting parameters of Mini Pix (the flight controller) on
Mission Planner (MP) or calibrating ESC.
Always ensure the trim levers at 0 and battery properly charged before connecting the
receiver.
Always check all servos and their connections prior to each run.
Stay at a certain distance from the aircraft during flight to avoid getting hurt by the
components of high-speed rotation (eg. Props, brushless motors)
After landing off, make sure the aircraft is disarmed and props have stopped moving before
getting close to touch the aircraft.
Always be sure about turning off the receiver before the transmitter.
When removing battery,
NEVER
pull the wires but please do press the yellow port with one
hand and pull the other yellow port with another. If the wrapping materials damaged , the
bare wires may cause
DANGER.
Follow the instructions of props installation in case of dropping during flight.
To ensure the best radio communication, please enjoy the flight at the space without
