background image

Stop

The 

Stop

button is located at the bottom of the screen between the Start and Reset buttons. By

clicking the Stop button, you can end the connectivity test, making the animated icon in the left-
hand corner disappear.  If you change to another RadioNET Manager screen, or minimize RadioNET
Manager the test stops.

Table 2: Signal Quality

Score

Color

Transceiver Orientation

5

Green

Best location

4

Green

Good location

3

Yellow

Improve if possible

0,1,2

Red

Need to Improve

Reset 

The 

Reset

button is located on the bottom-right hand corner of the screen. This button allows you

to clear information collected during the connectivity test, and restart the test.

Statistics

RadioNET Manager collects statistics including these while monitoring another station (see

Monitoring Another Station

on page 6).

The NETWORK AND INFORMATION STATISTICS screen tab is a read-only screen that provides the fol-
lowing statistical data about network station transmissions and receipts:

• 

Total number of transmissions

• 

Percent of successful transmissions

• 

Average number of retransmissions

• 

Total number of failed transmissions

• 

Rate of transmissions in Frames/sec

Figure 14: Network Information and Statistics Screen

• 

Total number of deferred transmissions

• 

Total number of transmissions received

• 

Rate of receiving in Frames/sec

R

ADIO

NET

M

ANA

GER

S

ECT

ION

2:

12

Summary of Contents for CardLINK 150





































Reviews: