9
Se
tu
p
w
Caution
:
• You must use an adapter that supplies 6 volts and delivers at least
300mA. Its center tip must be set to negative, and its barrel plug must
correctly fit the scanner’s
PWR
jack. Using an adapter that does not
meet these specifications could damage the scanner or the adapter.
Connecting Headset/Earphones
Your scanner does not have an internal
speaker, so to listen to your scanner or
to receive cell phone calls (see page
17 for more information) you must use
a microphone headset or earphones.
You can also add a second microphone
headset or earphones to talk to a friend
more easily during noisy races.
Option 1:
Connect the included
earphones or any others
with a
1
/
8
in. (3.5mm) jack to
either set of
s
jacks on the
left side of the scanner.
Option 2:
Connect a microphone headset to the
A
set of
s
/
MIC
jacks to use with a cell phone, and to the
A
or
B
jacks to
talk to another person.
Attaching the Belt Clip
1.
Align the clip with the slot on the back
of the scanner.
2.
Slide the clip down until it clicks into
place.
3.
Pull the top notch slightly, and push up
to remove.
