16
Ad
va
nc
ed
O
pe
ra
ti
on
Cloning Your Scanner
You can transfer your scanner’s data to and from another PRO-444
scanner using a connecting cable with
1
/
8
-inch (3.5mm) stereo plugs
on both ends (not supplied).
1.
Turn on both scanners.
2.
Connect the cable to each scanner’s
PC/IF/PHONE
jack.
3.
Press
EDIT
on both scanners.
4.
Use the
SEL/VOL
dial to select
CLONE
, then press
ENT
.
5.
Choose
RECEIVE
on the scanner you are transferring to, then
press
ENT
twice.
6.
Choose
SEND
on the scanner you are transferring from.
7.
Press
ENT
twice on the scanner you
are transferring from to send the data.
START!!
appears on the display.
8.
When
FINISH!!
replaces
START!!
, remove
the cable and press
EDIT
to go back to
the menu.
n
Note
:
ERROR!! Erasing DATA!!
appears
if the scanner cable is removed during data transfer. To cancel the
error, press
CLR
or
EDIT
. The target scanner resets to factory default
settings. Retry cloning the data
.
Delay
Two-way radio systems often have a period of several seconds
between a original and reply transmissions. To avoid missing a
transmission while in scanning mode, you can program a two-second
delay into any channel.
1.
While monitoring a car channel, press
FUNC
then
DELAY
.
2.
When your scanner stops on
a car number channel with a
programmed delay,
D
appears and
the scanner continues to monitor
CLONE RECEIVE
FINISH!!
CLONE RECEIVE
START!!
Grand Am
26
Gotham Comp
D Lo
456.72500
