15
Ad
va
nc
ed
O
pe
ra
tio
n
Key Tone
1.
Follow steps 1 and 2 under “
Settings
” and select
Key Tone
.
2.
Use
SEL/VOL
to select
Key Tone ON
or
Key Tone OFF
, then
press
ENT
.
n
Note
: Turning key tones off does not turn off the error beep.
Power Save
Your scanner features a power save circuit that is automatically
activated when you monitor a single car number frequency. This
allows the receiver to “Sleep” briefly while waiting for a call on the
selected channel. Power save is off by default.
1.
Follow steps 1 and 2 under “
Settings
” and select
Power Save
.
2.
Rotate
SEL/VOL
to choose
Power Save ON
or
Power Save
OFF
, then press
ENT
.
Display
1.
Follow steps 1 and 2 under “
Settings
” and select
Display
.
2.
Rotate
SEL/VOL
to
Contrast
or
Frequency
and press
ENT
.
3.
Contrast is set to 08 by default. Rotate
SEL/VOL
to increase or
decrease the contrast (between 0 and 15) then press
ENT
.
4.
Frequency display is on by default. Rotate
SEL/VOL
to select
ON
or
OFF
, then press
ENT
.
Back Light
You can set the back light to turn on when you press any button, or
only when you press the
G
/
î
button.
1.
Follow steps 1 and 2 under “
Settings
” and select
Back light
.
2.
Rotate
SEL/VOL
to choose
Light ON
(light turns on with any key
press) or
Light OFF
(light turns on when you press
G
/
î
), then
press
ENT
.
