29
3. Press
or
to change the selected feature’s settings.
4. To change to another feature setting, repeatedly press
FUNC
+
or
FUNC
+
until you see that setting. Then repeat
Step 3.
5. To store all customized settings and return to the normal
display, press
PTT
.
Frequency Step
To change the scanning frequency increment, with
CS
and a fre-
quency step (such as
.0100
for 10 kHz) displayed, press
or
until you reach the desired setting. You can change the fre-
quency step to 5 kHz, 10 kHz, 12.5 kHz, 15 kHz, 20 kHz, 25 kHz,
50 kHz, or 1 MHz.
Repeater Offset
To use a local repeater, once you have determined that repeat-
er’s offset, press FUNC+
or FUNC+
until you see
rPt
and
the current offset frequency are displayed. Then press
or
to
select the desired frequency step.
You can change the offset frequency from 0.0 Hz to 2 MHz (in 100
kHz steps) or 8MHz. The normal offset for the 2-meter band is
600 kHz (0.6 MHz).
Note: Once you set the offset frequency, you can turn this feature
on or off by pressing FUNC+SC while the transceiver is not in the
memory or calling frequency mode.
Power Save
This feature lets the radio conserve battery power by turning off
power to the receiver section and periodically turning it on to
check for a transmission. With
PS
and the current status (
on
or
oFF
) displayed, press
or
to turn this feature on or off.
19-1102.fm Page 29 Friday, March 19, 1999 4:08 PM