23
5. If you want to set scanning to skip the memory location,
press
SC
, then press
or
so
SCSP
ON
(scan skip)
appears.
To include the displayed location in a scan press or
so
SCSP oF
appears.
6. When you finish, press
SC
again, then press
PTT
to store
the
setting.
Scanning Standard Memory Locations
1. Press
MR (
so
appears), then press
SC
. The transceiver
scans all locations except the ones you programmed to
pass during scanning.
2. To change the scanning direction, press
or
.
3. To stop scanning, press
SC
again.
Locking Out (Skipping) Locations During
Memory Location Scanning
When you scan the 30 standard memory locations, you can set
the transceiver to lock out a location while scanning.
When the transceiver stops at a memory location you want to
skip, press
FUNC
.
PASS
briefly appears and the transceiver con-
tinues to scan, locking out (skipping) that location from then on.
Repeat this for each location you want to skip.
To return all skip settings to their stored settings, simply turn the
radio off then on again.
Note: You cannot lock out all memory locations. One location is
always active. If you lock out all but two active locations and then
lock out one more, EMPTY briefly appears and scanning stops.
MR
19-1102.fm Page 23 Friday, March 19, 1999 4:08 PM
