21
2. To change the frequency, hold down
C
until
and
C
flash.
3. Directly enter or press
or
to select the desired fre-
quency. If you want to enter a repeater frequency see
“Understanding Repeaters” on Page 17.
4. Press
C
to store the selected frequency in memory.
5. To program the repeater offset for the selected frequency,
press
FUNC+SC
. To change the value, press
or
. Select
0 Hz if you want to remove the offset. To store the setting,
press
C
or
PTT
.
While
and
C
appear, you can program other settings
such as CTCSS tones (see “Using Subaudible Tone
Squelch” on Page 24.)
To enable the calling frequency, press
C
at any time. The trans-
ceiver immediately goes to that frequency with the settings you
programmed. To exit the calling frequency mode, press
C
again.
USING STANDARD MEMORIES
Your transceiver has 30 standard memories that you can use to
store frequencies for quick access. You can also store other set-
tings such as repeater offset, CTCSS tones, and frequencies to
pass or lock out during scanning.
Storing a Transmit/Receive Frequency
1. Press
MR
to enter the memory setting mode.
and the last
used memory location
appear.
2. Repeatedly press
or
to select the desired memory
location. ------ appears if the memory location is empty.
3. Press
FUNC
+
MR
. The selected memory location and
flash.
MR
MR
MR
MR
19-1102.fm Page 21 Friday, March 19, 1999 4:08 PM
