24
Operation
To view the current high or low indoor or out-
door relative humidity alarm conditions,
press the desired
%RH
, then repeatedly
press
ALARM
until
+,
+,
+,
+, $/$50
$/$50
$/$50
$/$50
or
/2
/2
/2
/2 $/$50
$/$50
$/$50
$/$50
and
the alarm condition appear.
Note: When no humidity alarm condition is
set,
appears.
Setting a HI/LOW Relative
Humidity Alarm
Note: When setting a high or low relative
humidity alarm:
• If you do not press any button for about
60 seconds, the monitor returns to the
current reading display. If you want to
continue setting the alarm conditions,
start over at Step 2.
• To keep the existing condition in any
step, simply press
SET
to store the set-
ting and advance to the next step.
1. Press the desired
%RH
(in either the
indoor or outdoor temperature window).
2. Repeatedly press
ALARM
until
++++,,,,
or
/2
/2
/2
/2
appears.
3. Hold down
SET
until the last humidity
alarm condition flashes.
4. Repeatedly press (or hold down)
or
to set the humidity alarm.
5. Press
SET
to store the setting.
Note: The monitor automatically displays the
high temperature alarm setting after you set
the low alarm temperature and vice versa.
Clearing a HI/LOW Relative
Humidity Alarm Setting
To clear the conditions for a high or low rela-
tive humidity alarm so the alarm does not
sound, press the desired
%RH
or
CHAN-
NEL,
if necessary. Repeatedly press
ALARM
until the desired alarm setting (
+,
$/$50
+,
$/$50
+,
$/$50
+,
$/$50
or
/2
/2
/2
/2
$/$50
$/$50
$/$50
$/$50
) appears, then repeatedly press
until
appears.
USING THE RAIN GAUGE
The weather station’s rain gauge measures
rain as it falls and automatically calculates
the rate of rainfall per hour. You can set the
monitor to display the rainfall rate in in/hr
(inches per hour) or mm/hr (millimeters per
hour). To set the desired rainfall measure-
ment, press
RAIN
, then repeatedly press
81,7
81,7
81,7
81,7
until
LQ
KU
LQ
KU
LQ
KU
LQ
KU
or
PP
KU
PP
KU
PP
KU
PP
KU
appears.
Notes:
• We recommend you regularly check for
and remove any debris that might have
fallen into the rain gauge’s cylinder. Oth-
erwise, rain might not properly drain into
the gauge.
• The rain gauge automatically empties
itself. There is no need to empty the
gauge after rainfall.
To remove the rain gauge’s screen for easy
cleaning, simply pull up on the string
attached to the screen. When you finish,
place the screen back in the cylinder and
press it down into place.
USING THE RAIN WINDOW
Viewing the Previous Day’s and
the Total Amount of Rainfall
Records
To toggle between viewing yesterday’s rain-
fall amount and the total amount of rainfall
recorded in memory, press
RAIN
, then
repeatedly press
0(025<
0(025<
0(025<
0(025<
until
<<<<(67(5'$<
(67(5'$<
(67(5'$<
(67(5'$<
or
727$/
727$/
727$/
727$/
appears.
Notes:
• When displaying total rainfall records,
the time that the total rainfall memory
