22
Operation
the last memory reset), press
OUT
.
Then
repeatedly press
0(025<
0(025<
0(025<
0(025<
.
0$;
0$;
0$;
0$;
or
0,1
0,1
0,1
0,1
appears
when the monitor shows the maximum or
minimum recorded temperature. The record-
ed times of the maximum or minimum tem-
peratures and
67$03
67$03
67$03
67$03
also appear.
To reset the temperature records in memory
and record a new maximum or minimum
temperature beginning with the current read-
ing, hold down
0(025<
0(025<
0(025<
0(025<
until a beep sounds.
Using the HI/LOW Outdoor
Temperature Alarms
You can set the monitor to sound an alarm
when a set high or low outdoor temperature
is reached.
Each time the temperature changes and
meets or exceeds an alarm condition, the
current temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
flash, and
the monitor sounds an alarm for about 1
minute. To silence the alarm sooner, press
any key.
Note: If you press a key to silence the alarm,
the alarm stops sounding but the current
temperature and
+,
+,
+,
+,
or
/2
/2
/2
/2
continue to flash
until that alarm condition is no longer met.
To view the current temperature and the cur-
rent high or low outdoor temperature alarm
conditions, press
OUT
and repeatedly
press
$/$50
$/$50
$/$50
$/$50
.
+,
+,
+,
+,
or
/2
/2
/2
/2
appears when the mon-
itor shows the high or low indoor temperature
alarm condition.
Setting a HI/LOW Temperature
Alarm
1. Press
OUT
, then repeatedly press
CHANNEL
until
287
287
287
287
appears.
2. Repeatedly press
ALARM
so either
+,
+,
+,
+,
or
/2
/2
/2
/2
appears.
3. Hold down
SET
until the last tempera-
ture alarm condition flashes.
4. Repeatedly press (or hold down)
or
to set the temperature alarm.
5. Press
SET
to store the setting.
Note: The monitor automatically displays the
high temperature alarm setting after you set
the low alarm temperature and vice versa.
Clearing a HI/LOW
Temperature Alarm Setting
To clear the conditions for a high or low tem-
perature alarm so the alarm does not sound,
repeatedly press
ALARM
to select a high or
low temperature condition and repeatedly
press
until
appears.
Viewing the Outdoor Dew Point
and Wind Chill Temperature
Your weather station determines the current
dew point and wind chill temperatures from
the current collected data. To toggle between
the outdoor dew point temperature view and
wind chill temperature view, repeatedly press
OUT
until
'(:
'(:
'(:
'(:
or
:,1'
:,1'
:,1'
:,1' &+,//
&+,//
&+,//
&+,//
appears.
Note: The weather station determines the
wind chill temperature when it receives wind
speed signals from the anemometer.
Setting the Outdoor Dew Point/
Wind Chill Temperature Alarm
You can set the monitor to sound an alarm
when the outdoor dew point is within a spe-
cific range (from 2–29°F or 1–16°C) of the
current dew point temperature, or when the
wind chill temperature meets or drops below
a set temperature.
Each time the outdoor dew point temperature
changes and is within the programmed
range,
287
287
287
287
flashes and the monitor sounds
an alarm for about 1 minute. To silence the
alarm sooner, press any key.
