Radio Shack 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital..., Owner'S Manual

Page: 32 / 76

Using Your
P
hone
32
C
ALL
W
AITING
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
press
TALK/FLASH
on the handset to accept
the waiting call. There is a short pause, and
then you will hear the new caller. To return
to the original caller, press
TALK/FLASH
on
the handset again.
Ô
P
LACING A
C
ALL ON
H
OLD
You can place a call on hold for five
minutes. When five minutes has passed, the
call is disconnected, and the phone returns
to standby mode.
Ô
1. During a call, press
INTCM/HOLD
on the
handset or
INTERCOM/HOLD
on the
base. The call will be put on hold.
2. To talk to the caller, press
TALK/FLASH
or
SPEAKER
on a handset (or
SPEAKER
on the base). The phone will return
back to the call.
R
EDIALING A
C
ALL
The last three phone numbers dialed can be
quickly redialed from the handset or the
base. Redial numbers stored in the handset
and the base are independent from each
other.
Ô
1. With the phone in standby mode, press
the
REDIAL
soft key.
2. Press
VOL/RING/
or
VOL/RING/
to
scroll through the last three dialed
numbers.
3. Press
TALK/FLASH
or
SPEAKER
on the
handset (or
SPEAKER
on the base).
The selected number is dialed.
Ô
NOTES
Ô
Call Waiting
You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.
Placing a Call on Hold
• While a call is on hold,
CIDCW can not be
received.
• If you leave a call on
hold for more than 10
seconds, the display
screen will read,
Line
On Hold
.
Redialing a Call
• If the number exceeds
32 digits, only the first 32
digits are retained in
redial memory.
• If the redial memory is
empty, you will hear a
beep.