Caller ID
49
2. Press
TALK/FLASH
or
SPEAKER
on the
handset or
SPEAKER
on the base. The
displayed phone number dials
automatically.
From Talk mode
1. Press
TALK/FLASH
or
SPEAKER
on the
handset or
SPEAKER
on the base.
2. View the Caller ID message you want
to dial (see “Viewing the Caller ID List”
on page 47).
3. Press the
DIAL
soft key. The displayed
phone number will be dialed.
Long Distance calls and Area Code
Setting/Cancellation
While the present Caller ID information is
displayed, pressing
/TONE/<
will place or
remove the prefix “1” in the display to set
the call for a long distance call, or pressing
#/>
will set or cancel an area code (see
“Setting the Area Code” on page 28).
Ô
Storing Caller ID messages in the
Phonebook
Messages shown in the Caller ID list can be
stored in the phonebook. The phone
number and name of the party on the Caller
ID list can be stored in memory.
Ô
1. When the phone is in standby mode,
view the Caller ID message to be
stored.
Then press the
STORE
soft key.
Store/Edit Name
appears.
2. To complete the setting, follow the
steps 3-8 in “Storing Phone Numbers,
Names, Distinctive Rings, and Speed
Dial” on pages 38-39.
Ô
NOTES
Ô
•
When a long distance
call has been set,
1
appears in the display.
•
If a call comes in via a
telephone system that
does not offer Caller ID
service, no information is
stored.
•
If the Caller ID message
was received as a
private/unknown
number, or the message
does not have the
number, you cannot
store the message in the
Phonebook. If it was
received as private/
unknown name, the
message will be stored
as <No Name>.
•
Even if the 100 memory
locations are full, the
message will be stored
in the Phonebook.
However, the Caller ID
data will be erased from
the Caller ID list.
Summary of Contents for 5.8 GHz Multi-Handset Expandable Cordless Telephone with Digital...
Page 74: ...74 MEMO...
Page 75: ...75 MEMO...
