background image

4

Read This Before Installation

phone company notifies you as soon as possible and advises
you of your right to file a complaint with the FCC.

Also, the phone company can make changes to its lines, equip-
ment, operations, or procedures that could affect the operation
of this system. The telephone company notifies you of these
changes in advance, so you can take the necessary steps to
prevent interruption of your telephone service.

This equipment complies with the limits for a Class B digital de-
vice as specified in Part 15 of the FCC Rules. These limits pro-
vide reasonable protection against radio and TV interference in
a residential area. However, your equipment might cause TV or
radio interference even when it is operating properly. To elimi-
nate interference, you can try one or more of the following cor-
rective measures:

• Reorient or relocate the TV or radio’s receiving antenna.

• Increase the distance between the equipment and the radio

or TV.

• Use outlets on different electrical circuits for the equipment

and the radio or TV.

Consult your local RadioShack store if the problem continues.

Summary of Contents for 43-3808





















Reviews: