10
Preparation
the display. Repeatedly press
MEMO/2 WAY/HOUR
until you
hear or see the correct hour.
4. While holding down
SKIP/TIME
SET/CHECK,
press
PLAY/
PAUSE/MIN
. The system announces “01”.
01
appears on
the display. Repeatedly press or hold down
PLAY/PAUSE/
MIN
until you hear or see the correct minute.
Note: When you hold down
PLAY/PAUSE/MIN
, the system
will move forward by 10 minutes until it reaches 00.
5. Release
SKIP/TIME SET/CHECK
. The system announces
the day and time you set.
6. To hear the current day and time, press
SKIP/TIME SET/
CHECK
while the system is on or off.
Note: If you have not set the day and time and you press
SKIP/
TIME
SET/CHECK
, the system announces “Please set time”.
SETTING THE NUMBER OF RINGS
To control how long the system waits before it answers a call,
slide
RING SELECT
on the system’s right side to the desired
number of rings (
2
,
4
,
7
or
TS
).
TS
(Toll Saver) – If you choose the Toll Saver option, and there
are new messages, the system answers after two rings. Other-
wise, the system answers after four rings. This lets you avoid
unnecessary charges when calling by long distance to check
your messages. If you hear more than two rings, you know you
can hang up because the system has no new messages.
