Radio Shack 43-3704 Owner'S Manual Download

Page: 71 / 76

oublesho

oting

TROUBLESHOOTING

If your phone is not performing to your expectations, please try these

simple steps first

Symptom

Suggestion

The

CHARGE

LED won’t

illuminate when the handset
is placed in the cradle.

• Make sure the AC adapter is plugged into the

base and wall outlet.

• Make sure the handset is properly seated in the

cradle.

• Make sure the charging contacts on the handset

are clean.

The audio sounds weak.

• Move the handset and/or base to a different

location away from and/or scratchy metal
objects or appliances and try again.

• Make sure that you are not too far from the

base.

Can’t make or receive calls.

• Check both ends of the base telephone line

cord.

• Make sure the AC adapter is plugged into the

base and wall outlet.

• Disconnect the AC adapter for a few minutes,

and then reconnect it.

• De-register the handset (see “De-register the

Handset” on page 30) and register the handset
(see “Register the Handset to the Base” on
page 50).

• Make sure that you are not too far from the

base.

• If an outside call is already established, you

cannot make another outside call.

The handset doesn’t ring or
receive a page.

• Charge the batteries in the handset for 15-20

hours by placing the handset on the base or
charging cradle.

• The handset may be too far away from the base

unit.

• Place the base unit away from appliances or

metal objects.

• De-register the handset (see “De-register the

Handset” on page 30) and register the handset
(see “Register the Handset to the Base” on
page 50).

Unavailable

appears in

the display.

• Make sure that another handset is not in use,

and try the phone again.

Summary of Contents for 43-3704













































































Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands

Radio Shack 43-3704, Owner'S Manual

Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands