Radio Shack 43-3704 Owner'S Manual Download

Page: 43 / 76

Phonebook

b. Deleting the Stored Data

1. When the phonebook location to be

deleted appears, press the

EDIT

soft

key.

2. Press

CID/VOL/

REDIAL/P/

move the pointer to

Delete

?, and then

the

soft key.

3. Press

CID/VOL/

REDIAL/P/

choose

Yes

4. Press the

soft key. You hear a

confirmation tone.

Deleted!

appears

in the display.

OPYING

HONEBOOK

OCATIONS

Copy Phonebook allows you to transfer

stored phonebook locations from handset to

handset without having to manually re-enter

names and numbers. You can transfer one

memory (phonebook location) at a time, or

all memory locations at once.

1. When the phone is in standby mode,

press

MUTE

2. Press the

COPY

soft key.

3. Press

CID/VOL/

REDIAL/P/

, to

select the handset to which you want to
transfer the phonebook locations and
then press the

soft key.

4. Press

CID/VOL/

REDIAL/P/

select

One Memory

All

Memories:

and then press the

soft

key.

If you select All Memories,

Are you

sure?

appears on the display screen.

Press

CID/VOL/

REDIAL/P/

NOTE

If the memory location on
the receiving handset is full,
and can not store the
phonebook locations, you
will hear a beep.

Summary of Contents for 43-3704













































































Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands

Radio Shack 43-3704, Owner'S Manual

Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands