Radio Shack 43-3704 Owner'S Manual Download

Page: 32 / 76

Usin

g Your Phone

ANGING

From the handset, press

END

or return the

handset to the base.
From the handset speakerphone, press

END

or return the handset to the base.

Switching to the Handset

Speakerphone During a Call

To switch a normal call to the

speakerphone, press

SPEAKER

on the

handset. To switch from a speakerphone

call to a normal call, press

SPEAKER

ALL

AITING

If you have Call Waiting service and a call

waiting tone sounds while you are on a call,

press

TALK/FLASH

on the handset to accept

the waiting call. There is a short pause, and

then you will hear the new caller. To return

to the original caller, press

TALK/FLASH

the handset again.

LACING

ALL

OLD

1. During a call, press

INTCM/HOLD

on the

handset. The line soft key (

LINE1

LINE2

) to be placed on hold will flash.

The call will be put on hold.

If you leave a call on hold for more than
10 seconds, the display screen will
read Hold.

2. To talk to the caller, press

TALK/FLASH

SPEAKER

, or the correspond soft key

(LINE1 or LINE2). The phone will return
back to the call.

EDIALING

ALL

The last three phone numbers dialed can be

quickly redialed from the handset. Redial

numbers stored in the handset are

independent from each other.

NOTES

Call Waiting

You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.

Placing a Call on Hold

• You can place a call on

hold for 15 minutes.
When 15 minutes has
passed, the call is
disconnected, and the
phone returns to standby
mode.

• While a call is on hold,

CIDCW can not be
received.

Redialing a Call

• If the number exceeds

32 digits, only the first 32
digits are retained in
redial memory.

• If the redial memory is

empty, you will hear a
beep.

Summary of Contents for 43-3704













































































Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands

Radio Shack 43-3704, Owner'S Manual

Search results

Summary of Contents for 43-3704

Reviews:

Related manuals for 43-3704

Brands by name

Popular brands