71
Radijator Inženjering d.o.o, 36000 Kraljevo, Živojina Lazića - Solunca br.6, Srbija
tel. +381 36 399 140, fax. +381 36 399 150, http://www.radijator.rs
e-mail: [email protected]
Figure 9.3 Place where is set flue gas probe
The chimney itself should be made of ceramic pipes, and around them there should be the
insulation of 3- 5cm thickness and the outer layer is of the bricks or special elements. If the
chimney is not from ceramic pipes but of bricks, the light opening area of such chimney shall be
30 % higher than the surface of this ceramic pipes chimeny.
The chimney must have a door for cleaning and it must be well sealed. Chimney outlet on the
roof must be according to certain regulations. There are two cases: if the angle of the roof is less
than 12° and if the roof angle is bigger than 12 °. For angle less than 12 ° the height of the
chimney above the roof is 1 m and for the larger than 12 ° , then look at the sketch.
