Installation Manual
Gas Fire Heater – Cod. 99962NA – November 2002
6
DISTANCES FOR FIXING TO WALL
The water heater must be installed in a suitable
wall.
The water heater must not be fitted in a cupboard
or cabinet and to allow access for maintenance
operations, the minimum distances shown below
must be respected.
FIXING TO WALL
The installation and fixing to wall of the water
heater must conform to the national standards
and safety norms.
Follow these instructions:
1.
With a spirit level (min.length 40 cm.), draw a
line on the wall on which the water heater will
be installed.
2.
2) On the line drawn with the spirit level
mark the two points for insertion of the two
screw anchors or wall anchors Ø9 mm.
Next, with a drill, make the two Ø 9 holes.
3.
Hang the water heater and make hydraulic
connections.
N.B.: a fittings kit is supplied by request.
(option).