manualshive.com logo in svg

RADEMACHER 3650 00 12, Instruction Manual For The Electrical Connection And For Commissioning

Share
Download
RADEMACHER 3650 00 12 Instruction Manual For The Electrical Connection And For Commissioning Download Page 28

28

EN

i

Prior to the electrical connection, check that the voltage / frequency on 
the type plate corresponds to that of the local mains supply.

 

Follow the electrical connection specifications in the 
instruction manual of the tubular motor being used or that 
of the electrical appliance and external controller (when 
using E1/E2).

8.   Safety instructions for the electrical connection

 DANGER!

There is a risk of fatal electric shock when touching electrical com-
ponents. 

 

◆

All connection and installation work must only be carried out in a 
de-energised state.

 

◆

Disconnect all phases of the mains power lead and secure it to 
prevent any reconnection.

 

◆

Check that the system is de-energised.

 WARNING!

 WARNING!

Overloading of the Troll Comfort can lead to personal injury and 
destruction of the device (short circuiting).

The maximum switching capacity must not be exceeded; please ob-
serve the details in the technical specifications, see page 23. 

Summary of Contents for 3650 00 12

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands