102
EN
26.9 Menu 9.8.9 - Configuring the end points of the
1.
Open menu
9.8.9
.
2.
/
/
Allow the tubular motor to run for approx.
2 seconds to enable the connected motor
type to be detected:
Possible displays:
The tubular motor type has not been detected.
No
end point setting is possible.
OK
Return to menu.
The motor type has been detected, continue
with the end point settings.
3.
Setting the upper end point.
/
Press and hold the button. The
roller shutter travels upwards.
3.1
Release the button as soon as the desired end point is reached.
The upper end point is stored in the tubular motor.
4.
Setting the lower end point.
/
Press and hold the button. The
roller shutter travels downwards.
4.1
Release the button as soon as the desired end point is reached.
The lower end point is stored in the tubular motor.
5.
OK
Return to menu.
(not available for the Troll Comfort 3D)
Summary of Contents for 3650 00 12
Page 111: ...111 EN i ...
