manualshive.com logo in svg

RADEMACHER 3650 00 12, Instruction Manual For The Electrical Connection And For Commissioning

Share
Download
RADEMACHER 3650 00 12 Instruction Manual For The Electrical Connection And For Commissioning Download Page 20

20

EN

i

Installation and electrical connection

The Troll Comfort and Troll Comfort 3D are designed as a flush-mount-
ed device for indoor rooms. The electrical connection is carried out by 
means of the connecting terminals on the reverse side of the installa-
tion housing. 

Installation / compatible switch ranges

The Troll Comfort and Troll Comfort 3D can be integrated into standard 
switch ranges (50 x 50 mm).

i

 

It may be necessary to use an intermediate frame * 50 x 50 
(according to DIN 49075) depending on the switch range 
used.

* Not included

6.  Product description

6.1  Description of the safety functions

Troll Comfort with blockage detection *

The Troll Comfort is able to monitor the torque of motors equipped with 
a mechanical end point setting. This enables the controller to switch off 
the motor in the event of overloading or blockage, see page 85.

* not available for the 

Troll Comfort 3D

i

Summary of Contents for 3650 00 12

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands